Bismillah
Insha allah
30 minutes
robot arm cardboard.txt
---
https://www.youtube.com/watch?v=P2r9U4wkjcc
cardboard injections, no code, no electronics, playing kids toys
10ml sirange rubber piston
zip ties
card boand
glue gun
big tooth pics
pliers
meta spokes
icecream sticks
gum bottle
cutting plier type snipper to cut
---
sharp scissors
---
stack board
use drills
old battery
---
color water
---
tubes transparent
red,
yelllow
blue
green
---
hydralic arudino
later
---
robot arm search in google
https://www.amazon.in/Ayasa-Electronics-Robotic-Included-Included/dp/B077YMCBWW?tag=googinhydr18418-21
Ayasa Electronics Robotic Arm With Gripper Diy Kit, All Nuts & Bolts Included, Servos Not Included.
1000 rs
but servos not included
board not included
---
thingbits
https://www.thingbits.net/products/mover6-6dof-robot-arm?utm_source=google&utm_medium=cpc&gclid=Cj0KCQiA3b3gBRDAARIsAL6D-N_fliUdXClVPhUJpKyWx1XpB5nCLAjqM_ETK1skyz-4wTIKIS9h3AIaAuPXEALw_wcB
Mover6 6DOF Robot Arm
7.5 lakh
weight: 3.5KG
PAYLOAD: 200G
REACH : 600MM INCLUDING GRIPPER
DIGITAl input: 3x24v
digital output base
https://www.youtube.com/watch?v=N3fbjyLyWaA
---
4 axis robot arm
---
goto makerspace
https://www.instructables.com/id/4-Axis-Robot-Arm-DIY/
---
https://www.intorobotics.com/best-projects-diy-robotic-arms/
jumper cables
breadboard
towerpro MG995, SG90s mini
arudino uno
---
BCN3D Moveo
a 3d fully printable 5 axis robot arm
BCN3D Moveo is a robotic arm designed and built from scratch by the engineering team of BCN3D Technologies in collaboration with the Departament d’Ensenyament from the Generalitat de Catalunya.
The robotic arm is fully 3D printed and controlled with Arduino-compatible sketches.
Boot control uses the Marlin firmware, the same firmware used in 3D printers developed on the Arduino platform.
https://www.bcn3dtechnologies.com/en/bcn3d-moveo-the-future-of-learning/
https://github.com/BCN3D
---
https://all3dp.com/2/10-best-robot-arms-to-3d-print-or-buy/
---
Roboteurs RBX1 Remix
With amazing flexibility and aesthetics, this is another great, fully 3D printed robot arm. In addition to sourcing components yourself, Roboteurs offers a full kit of parts with a proprietary stepper driver to get your RBX1 running, all you need is a Raspberry Pi and a 3D printer. This arm is a 6DOF build, and offers great aesthetics.
--
(3D PRINTED) ROBOT ARM
3D Printable Robot Arm
Created by Andreas Hoelldorfer on Hackaday.io, this is a very large, fully 3D printed robot arm with many, many uses. The creator has been developing it through 4 iterations to make industrial arms accessible to everyone, and the project does that quite well. With a 6DOF design and a 2-kg maximum payload, this arm is full of possibilities.
https://hackaday.io/project/3800-3d-printable-robot-arm
---
Zortrax Robotic Arm
--
https://hackaday.io/project/12989-thor
Thor is an Open Source and printable robotic arm with six degrees of freedom.
Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same one that is used on most
manipulator robots that currently exist in the market.
In its upright position, Thor is about 625mm and it can lift objects up to 750 grams.
--
https://hackaday.io/project/3800-3d-printable-robot-arm
--
https://www.youtube.com/watch?v=H8zJjWfZWLE
--
ndreas Hölldorfer
Insha allah
30 minutes
robot arm cardboard.txt
---
https://www.youtube.com/watch?v=P2r9U4wkjcc
cardboard injections, no code, no electronics, playing kids toys
10ml sirange rubber piston
zip ties
card boand
glue gun
big tooth pics
pliers
meta spokes
icecream sticks
gum bottle
cutting plier type snipper to cut
---
sharp scissors
---
stack board
use drills
old battery
---
color water
---
tubes transparent
red,
yelllow
blue
green
---
hydralic arudino
later
---
robot arm search in google
https://www.amazon.in/Ayasa-Electronics-Robotic-Included-Included/dp/B077YMCBWW?tag=googinhydr18418-21
Ayasa Electronics Robotic Arm With Gripper Diy Kit, All Nuts & Bolts Included, Servos Not Included.
1000 rs
but servos not included
board not included
---
thingbits
https://www.thingbits.net/products/mover6-6dof-robot-arm?utm_source=google&utm_medium=cpc&gclid=Cj0KCQiA3b3gBRDAARIsAL6D-N_fliUdXClVPhUJpKyWx1XpB5nCLAjqM_ETK1skyz-4wTIKIS9h3AIaAuPXEALw_wcB
Mover6 6DOF Robot Arm
7.5 lakh
weight: 3.5KG
PAYLOAD: 200G
REACH : 600MM INCLUDING GRIPPER
DIGITAl input: 3x24v
digital output base
https://www.youtube.com/watch?v=N3fbjyLyWaA
---
4 axis robot arm
---
goto makerspace
https://www.instructables.com/id/4-Axis-Robot-Arm-DIY/
---
https://www.intorobotics.com/best-projects-diy-robotic-arms/
jumper cables
breadboard
towerpro MG995, SG90s mini
arudino uno
---
BCN3D Moveo
a 3d fully printable 5 axis robot arm
BCN3D Moveo is a robotic arm designed and built from scratch by the engineering team of BCN3D Technologies in collaboration with the Departament d’Ensenyament from the Generalitat de Catalunya.
The robotic arm is fully 3D printed and controlled with Arduino-compatible sketches.
Boot control uses the Marlin firmware, the same firmware used in 3D printers developed on the Arduino platform.
https://www.bcn3dtechnologies.com/en/bcn3d-moveo-the-future-of-learning/
https://github.com/BCN3D
---
https://all3dp.com/2/10-best-robot-arms-to-3d-print-or-buy/
---
Roboteurs RBX1 Remix
With amazing flexibility and aesthetics, this is another great, fully 3D printed robot arm. In addition to sourcing components yourself, Roboteurs offers a full kit of parts with a proprietary stepper driver to get your RBX1 running, all you need is a Raspberry Pi and a 3D printer. This arm is a 6DOF build, and offers great aesthetics.
--
(3D PRINTED) ROBOT ARM
3D Printable Robot Arm
Created by Andreas Hoelldorfer on Hackaday.io, this is a very large, fully 3D printed robot arm with many, many uses. The creator has been developing it through 4 iterations to make industrial arms accessible to everyone, and the project does that quite well. With a 6DOF design and a 2-kg maximum payload, this arm is full of possibilities.
https://hackaday.io/project/3800-3d-printable-robot-arm
---
Zortrax Robotic Arm
--
https://hackaday.io/project/12989-thor
Thor is an Open Source and printable robotic arm with six degrees of freedom.
Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same one that is used on most
manipulator robots that currently exist in the market.
In its upright position, Thor is about 625mm and it can lift objects up to 750 grams.
--
https://hackaday.io/project/3800-3d-printable-robot-arm
--
https://www.youtube.com/watch?v=H8zJjWfZWLE
--
ndreas Hölldorfer
No comments:
Post a Comment